Archive

Posts Tagged ‘firmware’

VMware T10 compliant VAAI integration and HP P2000 G3 FC storage

November 5th, 2015 No comments

 

I’ve recently been updating firmware on some development and testing storage and found that the HP P2000 storage array firmware update TS251R004 and above enable the HP P2000 G3 FC enable T10 compliance for the hardware.

 

To quote VMware’s documentation on their VAAI implementation specific to T10 compliance:

The second required component can be referred to as a VAAI plug-in specific to the VAAI filter. It implements vendor-specific VAAI functions such as ATS, XCOPY and WRITE_SAME. There were different implementations of the VAAI block primitives in vSphere 4.1, but all of the primitives in vSphere 5.0 have been ratified by T10, so any array that is T10 compliant should be able to use VAAI.

 

This means that you no longer need to be running the HP P2000 VAAI plugin software directly on ESXi hosts. In fact, HP recommend you uninstall and remove the plugin software before you upgrade the firmware on these arrays, otherwise you could suffer from performance degradation and possible loss of access to datastores.

My process was to first of all login to all hosts and check for the presence of the VAAI plugin.

  • SSH into host as root, run find / -name hp_vaaip_p2000
  • Ensure that nothing comes up with the find command, if it does (you see something like this output: /usr/lib/vmware/vmkmod/hp_vaaip_p2000), then you should use this HP document to ensure it is removed correctly: https://h20566.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=4118559&docId=mmr_kc-0123414&docLocale=en_US – this will involve some setting changes, and removing claim rules as well as removal of the HP P2000 VAAI VIB itself.
  • After verifying nothing came up, check other hosts, and once happy all hosts are clear of the plugin, upgrade the firmware for the P2000 system.
  • Ideally reboot ESXi hosts after the firmware update and ensure access to datastores is still there. Check the hardware acceleration status of datastores – they should show up as “Supported”.